Posts Tagged ‘install windows 7 from USB’

Contents

Windows 7 Tutorial Install From USB Drive

Windows 7 Tutorial Install From USB Drive

This guide works 100% for Vista and Windows 7, in contrast to most of the leaders there. I have many sites / blogs that you install Vista on a USB controller, but with incomplete or not Started Guide. I also have some guides that are not “the proper use of commands in this manual. After many hours I have with this guide to 100%.

Bootable USB drive

I just did this method on one of my friends machine and installed the new Windows 7 BETA. The main advantage is that by using USB drive you will be able to install Windows 7/Vista in just 15 minutes. You can also use this bootable USB drive on friend’s computer who doesn’t have a DVD optical drive.

The method is very simple and you can use without any hassles. Needless to say that your motherboard should support USB Boot feature to make use of the bootable USB drive.

Requirements:

*USB Flash Drive (Minimum 4GB)

*Windows 7 or Vista installation files.

Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.

1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.

2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.

*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.

Or

*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.

3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:

First type DISKPART and hit enter to see the below message.

Bootable USB Drive

Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.

4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.

So below are the commands you need to type and execute one by one:

SELECT DISK 1

CLEAN

CREATE PARTITION PRIMARY

SELECT PARTITION 1

ACTIVE

FORMAT FS=NTFS

(Format process may take few seconds)

ASSIGN

EXIT

Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.

Bootable USB Drive

5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).

6. Maximize the minimized Command Prompt in the 4th step.Type  the following command now:

D:CD BOOT and hit enter.Where “D” is your DVD drive letter.

CD BOOT and hit enter to see the below message.

7. Type another command given below to update the USB drive with BOOTMGR compatible code.

BOOTSECT.EXE/NT60 H:

14

Where “H” is your USB drive letter. Once you enter the above command you will see the below message.

8. Copy your Windows 7/Vista DVD contents to the USB flash drive.

9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB. If you got any problem in following this guide feel free to ask questions by leaving comment.

Original Tutorial By intowindows.com

Contents

Windows 7 Build 7262 Ready To RTM

Windows 7 Build 7262 Ready To RTM

Windows 7 was as high as 7262 for the construction of the road to RTM. It is true that all development milestones of the past 7100 mark belong to the RTM branch, but the fact is that as high as Build 7232, not to mention older builds, the release candidate label was very much into the operating . Only with Windows 7 Build 7260 of Microsoft is no longer to be released as RC. Instead Featured Build 7260 is not immediately visible evidence of either RC or RTM, suggesting that the Redmond company was getting closer and closer to the release of Windows 7 to the manufacturing sector.

But Build 7260 (6.1.7260.0.win7_rtm.090612 -2110) is not the RTM build. So much is clear now that Microsoft has also built in 7261 and also very choosy Softpedia 7262nd A reader named Nathan to find signs of the RC build 7260th Heritage Obviously, the transformation. VHD of 7260, which leaked and made available for download through torrent trackers, ISO enables access to idwbinfo.txt in the source folder. Here is what the file contains for Windows 7 Build 7260: “[BUILD INFO] BuildArch = x86 = buildtype fre, Build = winmain_win7rc Branch, OfficialBuild = true, Main Build = false, coverage = FALSE.”

Microsoft has now apparently to facilitate the transition from RC to RTM Windows 7 Windows 7, a sophisticated process, covers all areas of the operating system. It is associated with some aspects of Windows 7 is still the EU, while others RTM phase, until complete conversion. After Wzor, the software giant is currently considering whether to Windows 7 Build 7262 (6.1.7262.0.win7_rtm.090617 -1900) the development of RTM milestone.

The full build string indicates that the release was on 17 June. Windows 7 Build 6.1.7261.0.win7_rtm.090615-1900 had only two days earlier. The build in WinMain, the main branch of the tree for Windows 7, frozen at 6.1.7233.0.winmain.090614-1655. What is curious is that the building was on Sunday, showing that Microsoft is working at full speed and 24 / 7 for Windows 7th Wrap

Original news  From :softpedia By Marius Oiaga
Reblog this post [with Zemanta]

Contents

Windows Xp Transform Into Windows 7 WIthout Software

Windows Xp Transform Into Windows 7 WIthout Software

Original article By Askavg.com

http://img.photobucket.com/albums/v374/vishaal_here/XP_to_Seven.png

=======================================================

NOTE: If you are facing problems while saving a file after editing in resource hacker, then make sure you have disabled WFP (Windows File Protection) service using WFP Patcher, it can be found in our “Download” section.

Also if you are getting error “Can’t create file…“, that means you have edited and saved the same file in past and there is a backup file which need to be deleted before saving this file again. Go to the folder containing this file and you’ll see a similar file having “_original” in its name. Delete it and try to save the file in resource hacker.

=======================================================

As you all know Windows 7 Beta build has been released and is available everywhere on the net. We posted a small review of Windows 7 at following link:

What’s New in Windows 7: A Small Review with Screenshots

Windows 7 provides lots of new features along with a newly designed interface. It looks very similar to Windows Vista but there are many GUI changes like redesigned taskbar, Explorer, new boot screen and login screen, etc.

If you are still using Windows XP but want to enjoy the new Windows 7 look, then this tutorial will definitely help you.

After following this tutorial, you’ll get the same Windows 7 look in your Windows XP. Following is a list of things which are going to change after following this tutorial:

  • Windows Theme or Visual Style
  • Icons
  • Boot Screen
  • Login Screen or Welcome Screen
  • Cursors
  • Taskbar
  • Wallpapers and Sounds
  • Progress Dialog Box
  • Shutdown / Log off Dialog Box
  • About Windows Box
  • System Properties Dialog Box
  • Volume Control Window
  • Extras like “Aero Shake“, “Aero Snap“, “Aero Peek” and “Calculator
  • A Few Other Mods

So here we start our transformation tour:

PS: Please create a Restore point using “System Restore” before applying anything mentioned in this tutorial so that you can restore your system back to a working state if anything goes wrong.

1. Windows Theme or Visual Style:

Windows 7 provides a new refreshing look which includes redesigned taskbar and start menu, Windows Explorer and a few other small changes.

You can get the same look in Windows XP by using following theme:

Download SevenVG Theme for Windows XP

If you want a Black version, then you can get it using following link:

Download SevenVG Black Theme for Windows XP

If you don’t like the new Windows 7 Superbar, then you can download Normal Taskbar versions of these themes as well:

Download SevenVG Theme with Normal Taskbar for Windows XP

Download SevenVG Black Theme with Normal Taskbar for Windows XP

You can also use an excellent WindowBlinds skin created by “fediaFedia“. It requires Stardock WindowBlinds to be installed in your system.

Download Windows 7 WindowBlinds Skin for Windows XP

2. Icons:

You can get Windows 7 icons in XP using “SevenVG Icon Pack“:

Download Windows 7 Icon Pack for XP

3. Boot Screen:

Windows 7 contains a new animated boot screen which shows animated items/balls that come together to form Windows logo.

You can get a similar boot screen in Windows XP:

http://img.photobucket.com/albums/v374/vishaal_here/Windows7_Beta_Boot_Screen.png

Download New Windows 7 Beta Boot Screen for Windows XP

4. Login Screen or Welcome Screen:

Windows 7 login screen looks similar to Vista login screen except the new background image and the text displayed at bottom.

Download Windows 7 Login Screen for Windows XP

5. Cursors:

Windows 7 cursors are also similar to Vista which you can download using following link:

Download Windows 7 Cursors

6. Taskbar:

Windows 7 taskbar has been highly redesigned. It doesn’t show opened program’s name in their taskbar buttons, instead it only shows their icons. Also the taskbar buttons are a bit large in their size.

You can get the same Superbar in Windows XP using ViGlance:

ViGlance: Get Windows 7 Look-Like Superbar in Windows XP

Windows 7 taskbar also allows you to move taskbar buttons to change their positions, you can get the same feature in Windows XP by using “Taskbar Shuffle” utility:

Taskbar Shuffle: Move Taskbar and System Tray Buttons in Windows

7. Wallpaper and Sounds:

You can get Windows 7 wallpapers and sounds using following links:

http://img.photobucket.com/albums/v374/vishaal_here/Windows_7_Beta_Wallpaper_Thumb.jpg

Download Windows 7 Official Wallpaper Shown at PDC 2008

Download Windows 7 Beta Build 6936 Default Desktop Wallpaper

Download Windows 7 RC Build 7048 Sound Schemes, Wallpapers, Icons & Lots More

Download Windows 7 Build 7057 Wallpapers and User Pics

8. Progress Dialog Box:

Windows 7 progress dialog box is similar to Windows Vista. We can make our XP dialog box look like it by using Resource Hacker.

Open “%windir%\System32\Shell32.dll” file in Resource Hacker and go to:

Dialog -> 1020 -> 1033

Now replace the existing code in right-side pane with the code present in following file:

progress_dialog_box_code.txt

Click on Compile Script button.

You’ll also have to replace existing AVIs in the file with new ones. Download following Zip file and extract it:

Download AVIs

After extracting the Zip file you’ll get 3 AVI files. Replace existing AVIs in shell32.dll file with these new ones in following manner:

AVI -> 160 ->1033 with 160.avi

AVI -> 161 ->1033 with 161.avi

AVI -> 162 ->1033 with 162.avi

AVI -> 163 ->1033 with 162.avi

AVI -> 164 ->1033 with 162.avi

And also download a BMP file from here:

Download BMP

After extracting the BMP file from it, add it at 404 location in file. Just click on Action -> Add a new resource and then click on Open file with new resource button. Select the downloaded BMP file and click on Open. Now in Resource Name enter 404 and in Resource Language enter 1033 and click on Add Resource button. That’s it.

9. Shutdown / Log off Dialog Box:

Windows 7, similar to Vista, doesn’t have any shutdown / log off dialog box but we can redesign Windows XP default shutdown box to make it more refreshing like following screenshot:

Download required BMP files from here:

Download Shutdown BMPs

Mirror

Extract the file and you’ll get 4 BMPs with the name:

1.bmp

2.bmp

3.bmp

4.bmp

Now open “%windir%\System32\Shell32.dll” file in Resource Hacker and then replace following BITMAPs with the mentioned BMP files:

Bitmap -> 14351 -> 1033 with 1.bmp

Bitmap -> 14353 -> 1033 with 2.bmp

Bitmap -> 14354 -> 1033 with 1.bmp

Bitmap -> 14355 -> 1033 with 2.bmp

Bitmap -> 14356 -> 1033 with 3.bmp

now save the file and open %windir%\System32\msgina.dll file in Resource Hacker and then replace following BITMAPs with the mentioned BMP files:

Bitmap -> 20140 -> 1033 with 1.bmp

Bitmap -> 20141 -> 1033 with 2.bmp

Bitmap -> 20142 -> 1033 with 1.bmp

Bitmap -> 20143 -> 1033 with 2.bmp

Bitmap -> 20150 -> 1033 with 4.bmp

Now save the file.

10. About Windows Box:

To change the About Windows box you’ll need to change 2 things: The top logo and the text part.

Download the required BITMAP file from here:

Download About BMP

Open “%windir%\System32\Shell32.dll” file in Resource Hacker and then replace following BITMAPs with the downloaded BMP file:

Bitmap -> 131 -> 1033 (For XP Professional)

Bitmap -> 147 -> 1033 (For XP Home)

Now open %windir%\System32\msgina.dll file in Resource Hacker and then replace following BITMAPs with the downloaded BMP file:

Bitmap -> 101 -> 1033 (For XP Professional)

Bitmap -> 107 -> 1033 (For XP Professional)

Bitmap -> 128 -> 1033 (For XP Home)

Bitmap -> 129 -> 1033 (For XP Home)

Now to change the text of dialog box, open “%windir%\System32\xpsp1res.dll” file in Resource Hacker and then goto:

Dialog -> 14352 -> 1033

Now replace the existing code in right-side pane with the code in following file:

About Dialog Box Code

Click on Compile Script button and save the file.

11. System Properties Dialog Box:

To make System Properties dialog box look like Windows 7 one, visit following tutorial:

http://img.photobucket.com/albums/v374/vishaal_here/System_Properties_small.png

Get Windows 7 System Properties Dialog Box in Windows XP

12. Volume Control Window:

Windows 7 contains a redesigned Volume Control window which shows better details and graphics for device volumes. Now you can get a similar window in your XP.

http://img.photobucket.com/albums/v374/vishaal_here/Windows_7_Volume_Control_for_XP.png

Get Windows 7 Volume Control Box in Windows XP

13. A Few Extras:

Windows 7 provides 3 new features which are called “Aero Shake“, “Aero Snap” and “Aero Peek“.

Aero Shake” is quite useful. Suppose you have more than one windows opened and you want to minimize all other windows except the window which you are working on, then you have to simply shake the current window with your mouse and all other windows will be minimized automatically. Shake it again and all minimized windows will be maximized again.

Using “Aero Snap“, you can minimize, maximize, resize windows by just dragging-dropping them to the screen corners.

Aero Peek” has replaced the old “Show Desktop” feature in Windows 7. It can be found as a small rectangle present at last in Windows 7 taskbar. When you hover the mouse cursor over it, it allows you to peek behind all open windows by hiding all windows and showing only outlines of all windows.

You can get all these features working in XP using following tutorials:

Get Windows 7 “Aero Shake” Feature in Windows XP

Get Windows 7 “Aero Snap” Feature in Windows XP

Get Windows 7 “Aero Peek” Feature in Windows XP

Windows 7 also contains a new redesigned Calculator which has new GUI and new options.

http://img.photobucket.com/albums/v374/vishaal_here/Windows_7_Calculator_for_XP.jpg

You can get the same calculator in Windows XP using following link:

Get Windows 7 Like Calculator in Windows XP

14. A Few Other Mods:

1. Windows 7 Desktop context menu is much different than XP one.

Following are a few things which are new in Windows 7 menu:

  • View” menu visible in Desktop context menu
  • Arrange Icons By” renamed to “Sort by
  • Properties” renamed to “Personalize
  • Auto arrange icons” and “Align icons to grid” options moved from “Sort by” menu to “View” menu
  • 2 new options “Screen resolution” and “Gadgets” added to the menu

So above are a few changes which are new in Windows 7 but we can get them in XP using following tutorial:

Get Windows 7 Desktop Context Menu in Windows XP

2. Windows 7’s Programs menu is similar to Vista but very different from XP, you can use following tutorial to make your XP Programs menu similar to Windows 7:

Change Look-n-Feel of Windows XP Start Menu

3. Windows 7, similar to Vista, shows the same ORB just before the Login screen. You can also get a similar thing in XP. Just download following BMP:

Download ORB BMP

Mirror

Open regedit and goto:

HKEY_USERS\.DEFAULT\Control Panel\Desktop

In right-side pane change the value of Wallpaper String value to the Path of downloaded BMP file. e.g., if you saved the BMP file at “D:\Startup.bmp”, then set the value of Wallpaper to D:\Startup.bmp. Now you’ll get a similar ORB before the Login screen in XP.

4. Windows 7 explorer is quite similar to Vista and shows the same small horizontal progress bar under each drive icon for the drive space.

http://img.photobucket.com/albums/v374/vishaal_here/Vista_Drive_Status.png

You can also get the same in XP by using a 3rd party utility, which is uploaded here:

Download Windows 7 Drive Status Utility

Mirror

If the above utility doesn’t work for you, you can try following utility which does the same job:

Download Vista Drive Icon

Just run the file and it’ll add the progress bar under each drive.

5. To get the Breadcrumbs in addressbar you can use “QT Addressbar”:

QT Addressbar: Windows 7 Addressbar Clone for Windows XP

That’s all for now. After following all the above mentioned steps, you’ll get Windows 7 look-n-feel in Windows XP.

We’ll keep updating this tutorial whenever we get something new to add or Microsoft makes some new changes to Windows 7…

Reblog this post [with Zemanta]

Contents

Make Your Windows 7 Super Fast

Make Your Windows 7 Super Fast

1. Registry Tweaks:

Following topic contains a few registry tweaks to optimize your system performance and add a few useful extras:

Collection of Registry Tweaks for Windows 7

You just need to download the ZIP file, extract it and run the file. It’ll ask for confirmation, accept it. Restart your system to take affect.

2. Right-click on Computer icon on Desktop and select Properties (or press WIN + Pause/Break keys). Now click on Advanced system settings link in left side pane (You can open it directly by giving sysdm.cpl command in RUN or start menu search box). Now click on Settings button in Performance section:

It’ll open another window. Disable all unnecessary options in Visual Effects tab, you can remain following options enabled according to your requirements:

  • Enable desktop composition (If you want to use Windows Aero theme)
  • Enable transparent glass (If you want to use transparency in Windows)
  • Show thumbnails instead of icons (If you want to show thumbnails in Explorer)
  • Show window contents while dragging (If you want windows to show content while moving them)
  • Smooth edges of screen fonts (If you want to show smooth fonts)
  • Use drop shadows for icon labels on the desktop (If you want to show shadows under desktop icon labels)
  • Use visual styles on windows and buttons (If you want to use Windows Aero or Basic theme.)

3. Open Windows Explorer and go to “Organize -> Folder and Search Options” and click on View tab.

Now disable following options:

  • Display file size information in folder tips
  • Hide extensions for known file types
  • Show encrypted or compressed NTFS files in color
  • Show pop-up description for folder and desktop items

4. Right-click on Computer icon on Desktop and select Manage (You can also open it directly by giving services.msc command in RUN or start menu search box).

Now go to Services & Applications -> Services. Here you can set a few unnecessary services to Manual, so that these services don’t start automatically with Windows and you can get a faster startup. Read the rest of this entry »

Contents

Install Windows 7 RC

Install Windows 7 RC

What you need to know before you Install Windows 7 :
  • Windows 7 Beta to install on your PC, create a backup of your data, and a clean installation of the RC. Then you need to reinstall your programs and files, settings and other data to use for testing
  • Although we believe that this is a stable and high quality before the Windows version, the CR is not the finished product. Perhaps the computer crash or cause the loss of important files or information.
  • They are quite on their own, such as the software for free. You should be comfortable and troubleshooting of building a PC. If you have a problem, you will find plenty of help from other testers in line, but are not the official technical support. Before installing the software, please read these two pieces of important information: things to know and release notes.
  • IMPORTANT: The RC will expire on 1 June 2010. From 1 March 2010, the PC is turned off every two hours. Windows will notify you two weeks before the BI-hour stoppages beginning. To avoid the need to recompile your test machine with a valid version of Windows before the software is running. You need to rebuild your PC to the test to replace the operating system and reinstall all your programs and data. (For more information, consult the FAQ.)
Things you need to have before you start Windows 7 Tutorial Instalation:
  • Dedicated test PC: Please do not try RC primary in your home or business PC
  • Data backup: The information on your PC will not be saved during installation. Back up your PC before you start, and frequently during testing. You can back up files to an external hard disk, a DVD or CD, or a network folder.  If you’re running Windows 7 Beta on the PC you’ll use for test, you can use Windows Easy Transfer to create a backup on an external drive. To find and launch Windows Easy Transfer, just type “easy” in the Start search box.
  • Recovery disc: A recovery disc restores your computer to its out-of-the-box state. Most computers come with one. If yours didn’t, contact your PC maker.
  • Antivirus program: Make sure your antivirus program is up-to-date, run it, then disable it before installing Windows 7 RC. When you finish the installation, remember to re-enable the antivirus program.
  • Internet connection: Be sure to connect to the Internet after you finish the installation. Being connected helps make sure you get useful security and hardware updates. We recommend you keep your PC set to automatically check for updates through Windows Update.
Getting ready to install the Release Candidate
What you’ll need:
  • A blank DVD
  • A PC with a DVD burner
  • A PC for testing with these system requirements:
    • 1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
    • 1 GB RAM (32-bit) / 2 GB RAM (64-bit)
    • 16 GB available disk space (32-bit) / 20 GB (64-bit)
    • DirectX 9 graphics processor with WDDM 1.0 or higher driver

Note: Some product features of Windows 7, as the ability to watch and record live TV or scroll through the use of “contact” may require advanced or additional hardware.

Search
Computers Computer Blogs - BlogCatalog Blog Directory